Shieldon’s Scythe DC01A: Step-by-Step on How to Disassemble the Knife

Are you in search of a step-by-step manual on the disassembly procedure for Shieldon’s Scythe DC01A knife?

Manufactured by the esteemed team at DC Blades and Shieldon Knives, this extraordinary EDC folding knife showcases a scythe-like blade tip, distinguishing it from other knives in its category.

Featuring a sleek and compact design, measuring just 6.11 inches (155.2mm) in total length, the Scythe embodies an exquisite blend of aesthetics and practicality.

Its name pays tribute to the legendary Death Scythe wielded by the Grim Reaper, reflecting the immense power encompassed within every aspect of its construction.

You need not look any further, as this article will furnish you with comprehensive instructions on the proper method to disassemble the knife.

It is important to be very careful when dismantling any knife as it can be dangerous. With that being said, let’s begin!

 

Prepare your T8 Screw

When it comes to disassembling the Shieldon Scythe DC01A knife, one of the most important tools you need is a T8 screw.

This small but mighty component plays an essential role in keeping your knife together and ensuring its parts remain secure during use.

The T8 screw also helps make sure that all components fit snugly when reassembled after cleaning or maintenance.

With its durable construction and reliable performance, the T8 screw is an invaluable part of any EDC folding knife setup.

 

Open Carefully

Once you have your T8 screw ready, the next step is to locate and open the knife carefully.

Remember that even though this knife is designed for EDC purposes, it still has a sharp blade and can cause injury if mishandled.

Start by placing your thumb on one side of the blade’s spine while simultaneously gripping the handle with your fingers. Then, gently apply pressure and push the blade out of the handle until it is fully extended.

Be sure to keep your other hand away from the sharp edge as you do this for safety reasons.

Upon opening, you will see the small parts and how the designers are meticulous in their creation.

 

Two Hidden T6 Screws in the Liners

Once the knife is open, you will need to locate two T6 screws hidden in the handle liners.

These screws are responsible for keeping the handle and blade parts together when both components are folded up. You will want to carefully unscrew them before attempting to disassemble them any further.

 

Disassembled Scythe

It is simple to completely disassemble the Shieldon Scythe DC01A knife once these screws are removed.

You should now be able to remove all of its parts, including the pivot, pocket clip, and blade.

It is important to keep track of all the components and their assembly order as you slowly take apart the knife piece by piece.

 

Tips on How to Clean the Scythe DC01A

Anti-rust oil

The use of anti-rust oil or wipes is a great way to keep your knives and tools in top condition.

Whether you’re an avid outdoorsman, a professional knife connoisseur, or just enjoy keeping your favorite knife sharp and clean, it’s important to protect them from rusting.

Anti-rust oil or wipes can help prevent corrosion caused by moisture and humidity while also providing lubrication for moving parts.

In addition, they can be used on other items such as firearms and tools to ensure that their metal components remain rust-free for years of reliable service.

Carefully wipe the liners and scales

Once you have disassembled the Scythe DC01A, be sure to also clean its liners and scales.

Using a soft cloth or cotton swab, carefully wipe away any dirt or debris that may have accumulated on the surfaces of these components.

Be sure not to use excessive force as this could cause damage. After cleaning, it is a good idea to apply a light coating of anti-rust oil or lubricant before reassembling the knife.

Backspacer that resembles the Grim Reaper Symbol

For the final touch, take a look at the backspacer on the Scythe DC01A. Its unique design resembles the symbol of the Grim Reaper and adds an extra layer of aesthetic value to this already impressive knife.

This is a great way to ensure your Knife remains looking stylish and formidable for many years to come.

Take note to be careful wiping the lock bar as oils can cause it to become slippery.

 

Assembly of Scythe DC01A

Starts with pivot

The assembly of the Shieldon Scythe DC01A starts with the pivot.

Position the two parts of the handle together and make sure that they are lined up properly.

Then, reinsert the T6 screws that were removed earlier and tighten them slightly to ensure secure attachment between the blade flipper and handle scales.

Lubricating the ball bearing before putting the blade back

The blade of the Shieldon Scythe DC01A knife is made from 154 CM material, and its intense sharpness can pose a serious risk if it slips while being handled.

Thus, we need to be sure that all components are properly lubricated before reassembling the knife.

Lubrication allows for smoother deployment and helps prevent the blade from sticking when opened.

To lubricate the ball bearing, take a few drops of penetrating oil or graphite and spread it across its surface before putting the blade back in place.

Knife pivot lubricator application

Knife pivot lubricators provide the essential lubrication necessary for the proper operation of folding knives.

Used both before and after assembly, they help reduce friction in the knife’s moving parts and ensure smoother deployment of the blade.

Lubricants also help prevent rust from forming on the metal components, providing extra protection against wear and tear.

Knife pivot lubricators can be applied to all types of folding knives, including the Shieldon Scythe DC01A.

Put the blade carefully

Finally, it is time to put the blade back in place.

Be sure to line up the blade flipper and handle liners properly before slipping them into position.

Do not forget to press the liners from both sides to make sure they fit snugly together.

Screw the T6 screws back into place

Once you have all the parts in place, it is time to screw the two T6 screws back into position and tighten them securely.

This will help keep your knife components firmly locked together when not in use and ensure their long-term stability during extended use.

A few turns of the screwdriver should be enough to tighten them into position without causing any damage.

Close the scale

To close the scale, simply push both sides of the handle together and secure them with a few quick snaps.

If the centering of the knife seems off, simply adjust the pivot position of the blade before tightening them back up.

Check if the opening mechanism is working

Once the knife is closed, it’s time to check if its opening mechanism is working correctly.

Open and close the blade several times to ensure that everything is in order.

If you find any irregularities or difficulties, make sure to readjust the pivot position of the blade before using your knife again.

Fun fact: Wire clip is reversible! You can try it on the left-hand side

Finally, did you know that the pocket clip of the Scythe DC01A is reversible? That’s right!

You can try using it on the left-hand side as well if you prefer. This feature allows for increased flexibility in terms of knife orientation and storage.

So go ahead and get creative with your knife setup!

 

Takeaways

In conclusion, the Shieldon Scythe DC01A knife is a great tool for those looking to add an extra layer of style and durability to their everyday carry.

With proper maintenance and cleaning, your Scythe DC01A will remain sharp and stylish for many years to come!

If you want to get your hands on the beautiful EDC DC01A Scythe, contact Shieldon today!

Click to have more Shieldon EDC knives and tools fun.