OEM Fixed Hunting Knife 3Cr13 Blade Color wood Handle JM-1029 01
OEM Fixed Hunting Knife 3Cr13 Blade Color wood Handle JM-1029 02
OEM Fixed Hunting Knife 3Cr13 Blade Color wood Handle JM-1029
OEM Fixed Hunting Knife 3Cr13 Blade Color wood Handle JM-1029 04
OEM Fixed Hunting Knife 3Cr13 Blade Color wood Handle JM-1029 05
OEM Fixed Hunting Knife 3Cr13 Blade Color wood Handle JM-1029 06
OEM Fixed Hunting Knife 3Cr13 Blade Color wood Handle JM-1029
OEM Fixed Hunting Knife 3Cr13 Blade Color wood Handle JM-1029
OEM Fixed Hunting Knife 3Cr13 Blade Color wood Handle JM-1029
OEM Fixed Hunting Knife 3Cr13 Blade Color wood Handle JM-1029
OEM Fixed Hunting Knife 3Cr13 Blade Color wood Handle JM-1029 01
OEM Fixed Hunting Knife 3Cr13 Blade Color wood Handle JM-1029 02
OEM Fixed Hunting Knife 3Cr13 Blade Color wood Handle JM-1029
OEM Fixed Hunting Knife 3Cr13 Blade Color wood Handle JM-1029 04
OEM Fixed Hunting Knife 3Cr13 Blade Color wood Handle JM-1029 05
OEM Fixed Hunting Knife 3Cr13 Blade Color wood Handle JM-1029 06
OEM Fixed Hunting Knife 3Cr13 Blade Color wood Handle JM-1029
OEM Fixed Hunting Knife 3Cr13 Blade Color wood Handle JM-1029
OEM Fixed Hunting Knife 3Cr13 Blade Color wood Handle JM-1029
OEM Fixed Hunting Knife 3Cr13 Blade Color wood Handle JM-1029

OEM Fixed Hunting Knife 3Cr13 Blade Color wood Handle JM-1029

Item NO.: JM-1029

Item segment: Hunting knife

Blade material: 3Cr13

Handle material: Color wood

Blade thickness: 3mm/0.118”

Blade length: 122mm/4.8”

Handle thickness: 16mm/0.63”

Total length: 235mm/9.25”

Weight: 198g/6.98 oz

Blade style: Drop point

Handle color: Camo

Sheath: Nylon

Blade finish: Satin

Blade grind: Flat

ODM Regular MOQ: 1200

Videos

PRODUCT PARAMETERS:

Item NO.: JM-1029

Item segment: Fixed hunting knives

Blade material: 3Cr13

Handle material: Color wood

Blade thickness: 3mm/0.118”

Blade length: 122mm/4.8”

Handle thickness: 16mm/0.63”

Total length: 235mm/9.25”

Weight: 198g/6.98 oz

Blade style: Utility Point

Handle color: Camo

Sheath: Nylon

Blade finish: Satin

Blade grind: Flat

ODM Regular MOQ: 1200

 

A CLOSER LOOK AT JM-1029:

3Cr13: It is a martensitic stainless steel with good machining performance. After heat treatment (quenching and tempering), it has excellent corrosion resistance, polishing performance, high strength and wear resistance, and is suitable for manufacturing to withstand high loads, high wear resistance and Plastic molds under the action of corrosive media. After quenching and tempering, the 3Cr13 material with a hardness below HRC30 has better workability and is easy to achieve better surface quality.

Utility Point: It is similar to the water drop type tip, but the tip angle is sharp and can be used for puncture. Generally, the portable tools are in a tip mode.

Blade length is 10 cm or less

There are large sheath knives that can also be used like machetes. It’s reliable for the main use of debranching and batoning

Light and easy to use

For knives, lightness and durability are not simply proportional. The most relevant to durability is the structure of the knife. Even though it is lightweight, the sheath knife with the blade on the handle is durable and can easily chop wood.

The shape of the grip is designed to fit your hand, so you can hold the knife in a stable manner. This is important for safe batoning and bushcraft.

The sheath that stores the blade when the knife is not in use is also equipped with double measures to prevent it from coming off, so you can carry it with confidence. The first stage is locked to the sheath body, and the second stage is a snap button type belt lock. It is designed so that it will not fall even if the blade comes off, so you can carry it with confidence.

How to sharpen a knife

 since it is not possible to sharpen the whole at once, the trick is to sharpen the tip, middle, and root separately. First, sharpen one side, but be sure to use the whetstone evenly. If you use only a part of the grindstone, only that part will be worn out and you will not be able to sharpen it correctly.

Whether or not the knife has been sharpened is marked by the appearance of burrs with a rough feel when touched from the opposite side of the sharpened surface. Since the knife can only be sharpened on the part where the finger is attached, sharpen the knife, touch it from the opposite side to check that burrs are coming out, change the sharpening location, and repeat the same on the other side.

After sharpening both sides, lightly touch the entire knife to the grindstone and remove the burrs on the knife to draw a circle, and the blade sharpening is complete.

Change the number from a small grindstone to a large grindstone, but repeat the same procedure. Finally, wash the knife thoroughly. Also, wash the grindstone thoroughly with water without using detergent and dry it in the shade. If it is not dried, it may cause mold to grow.

 

OEM SERVICE:

Our brand-focused manufacturing process is aimed at providing clients with a seamless and hassle-free OEM sourcing experience every time.

01 Send Your Enquiry:Let us know how you want your knife project to be, from designs and materials to printing and packaging.

02 Get Instant Quote:We provide you with a comprehensive quote, detailing all expenses, including materials and logistics fees.

03 Confirm the Prototype:A functional prototype is built based on your design specification and sent to you for testing and confirmation.

04 Place Your Order:Once you are satisfied with the prototype sent, you may now place the order for your knife project and begin mass production.

05 Manufacturing and Delivery:Full-swing production of the knife project is commenced, along with thorough product inspection and packaging. The completed order is then shipped to you.

06 After-Sales:Our partnership does not end at order delivery, as our responsive client support team is ready to assist and respond to inquiries at the soonest time.

All  Customization Options

Edge, Blade Length, Blade Types, Blade Materials, Handle Materials, Opening Mechanism, Locking Mechanism

 

ABOUT SHIELDON:

Deep-Rooted Knife Making Experience

Guangdong Shieldon Technology Co., Ltd., a subsidiary corporation of DKS which was established in 1998, delivers exceptional pocket knives, multi-tools, and more in the competitive international market. We focus on designing, manufacturing, and supplying the global market with functional and reliable pocket knives, and multi-purpose tools for outdoor and everyday use. Our extensive manufacturing skill along with our cutting-edge production equipment and ISO9001:2015 and ISO9001: 2015 certifications, assures our clients of the quality of every product.

Downloads

Send Your Enquiry

Send us your enquiry and we will get back to you within 24 hours.

Get sharp-edge knives and business from Shieldon.

en_USEN

Connecting With Us

We are ready to help at any stage of your OEM knife project. Send us your enquiry and your budget and we will get back to you within 24 hours.