제품 번호.: GL-22367
아이템 세그먼트: 접는 나이프
블레이드 재질: 9Cr
핸들 재질: 티타늄
블레이드 HRC: 58-60
블레이드 두께: 0.071″ / 1.8mm
블레이드 길이: 3.54″ / 90mm
핸들 두께: 0.315 / 8mm
총 길이: 6.5″ / 165mm
무게: 1.57oz / 44.5g
블레이드 스타일: 낙하 지점
핸들 색상: 은
포켓 클립: 팁업
잠금 장치: 잠금 없음
열린 길: 네일 마크
블레이드 마감: 새틴
블레이드 그라인드: 평평한
ODM 일반 MOQ: 200
Item NO.: GL-22367
항목 세그먼트: 접는 나이프
Blade material: 9Cr
Handle material: Titanium
블레이드 HRC: 58-60
Blade thickness (mm): 1.8
Blade length (mm): 90
Handle thickness (mm): 8
Total length (mm): 165
Weight (g): 44.5
Blade thickness (in): 0.071
Blade length (in): 3.54
Handle thickness (in): 0.315
Total length (in): 6.5
Weight (oz): 1.57oz
블레이드 스타일: 드롭 포인트
핸들 색상: 실버
Pocket clip: Tip-up
잠금 메커니즘: 프레임 잠금
열린 방법: 네일 마크
Blade finish: Satin
블레이드 그라인드: 플랫
낙하 지점:대패질 팁과 마찬가지로 워터 드롭 헤드 팁의 뒷면은 블레이드의 2/3에 있으며 특정 라디안으로 팁을 향해 아래쪽으로 확장됩니다.
이것은 매우 강력한 도구 팁 유형이며 도구 시장에서 가장 인기있는 도구 팁 중 하나입니다. 절단 성능이 뛰어나며 블레이드에 매우 유연한 특성을 부여합니다.
드리퍼 팁은 일반적으로 제조업체에서 개선하고 기하학적 팁과 드립퍼 팁의 조합과 같은 다른 팁과 결합됩니다.
9Cr martensitic heat-resistant steel 9Cr martensitic heat-resistant steel has deflected the slope of its expansion-temperature curve during the heating process before the α→γ phase change occurs, and the temperature at the deflection point is about 660 °C. The steel sample was heated to three temperatures of 600, 660 and 750 °C using the same heating rate, the water was quenched after 15 minutes of insulation, and the differences in the tissue in each sample were analyzed by metallographic microscopy and scanning electron microscopy. The results show that the number of precipitated phases in the samples heated to 660 °C and 750 °C of 9Cr steel is significantly increased compared with 600 °C.
The client’s favorite Shieldon knife “GL-22367”
Shieldon knives that develop various types.
Among them, the “GL-22367” was found by searching for a “folding type” that is easy to carry and has a size that is easy to use at a reasonable price.
가볍고 휴대가 간편함
칼날의 길이는 7.5cm 정도인데 접을 수 있고 포켓클립이 있어서 휴대도 간편합니다.
The material is Titanium steel that does not easily rust, and the sharpness is outstanding.
Part of the blade is also a jagged half-wave sword, which is useful for cutting hard objects such as ropes, cardboard, and wood.
It looks rugged and heavy, but its lightweight weight of 76g is also attractive.
쉽게 열 수 있음
Some “folding type” knives make it difficult to pull out the blade, but this is a liner lock type that can be opened with one hand.
Moreover, since the nail mark are attached to both sides, it can be opened with one hand with either the right or left hand.
손잡이 부분도 크로스패치 패턴으로 되어있어 미끄럽지 않고 사용하기 편한 점도 마음에 듭니다.
Shieldon OEM Folding knife GL-22367 –SERRATED Half-wave blade wholesale –Military shop
The EDC knife brand Shieldon representing the knife fashion. This time, I will introduce the ones that were suitable for TPO, including the ones that I use the Shieldon EDC knives, which are high quality and innovative and have been loved by campers all over the world. Since it produced military knives, it is a brand that is used by many adventurers and professional EDC athletes.
What is the recommended Shieldon knife for camping?
There are various types of Shieldon EDC knives, such as a “folding knife” that folds the blade on the handle, a fixed “fixed knife”, and one of the folding knives, the “assist opening knife”.
There are many unique knives, but among them, we will introduce the recommended knives of “folding knives” and “fixed knives” that are easy to use in camping.
손잡이 부분에 일본식 무늬가 있고 내구성이 뛰어난 스타일리시한 컴팩트 칼입니다.
Shieldon Folding Knife GL-22367 Frame Lock Green Folding Knife: Military Shop Reps Gear
● Details of folding knife Open size: Approx. 20.5 cm, Closed size: Approx. 12.5 cm, Blade thickness: Approx. 2 mm, Weight: Approx. 105 g, Blade material: 9Cr18MoV steel (titanium nitride coating) [Specifications and design changed without notice May be done]
당사의 브랜드 중심 제조 프로세스는 고객에게 매번 원활하고 번거로움 없는 OEM 소싱 경험을 제공하는 것을 목표로 합니다.
01 문의 보내기: 디자인 및 재료에서 인쇄 및 포장에 이르기까지 나이프 프로젝트를 어떻게 원하는지 알려주십시오.
02 즉시 견적 받기:재료 및 물류 비용을 포함한 모든 비용을 자세히 설명하는 포괄적인 견적을 제공합니다.
03 프로토타입 확인:귀하의 설계 사양에 따라 기능적인 프로토타입이 제작되어 테스트 및 확인을 위해 발송됩니다.
04 주문하기: 보낸 프로토타입에 만족하면 이제 나이프 프로젝트를 주문하고 대량 생산을 시작할 수 있습니다.
05 제조 및 납품 : 철저한 제품 검수 및 포장과 함께 나이프 프로젝트의 본격적인 생산이 시작됩니다. 완료된 주문은 귀하에게 배송됩니다.
06 애프터 세일즈:우리의 파트너십은 주문 배송으로 끝나지 않습니다. 우리의 반응이 빠른 고객 지원팀이 가장 빠른 시간에 문의를 지원하고 응답할 준비가 되어 있기 때문입니다.
모든 사용자 지정 옵션
가장자리、 블레이드 길이、 블레이드 유형、 블레이드 재료、 재료 취급、 개방 메커니즘、 잠금 메커니즘
뿌리깊은 칼 만들기 체험
1998년에 설립된 DKS의 자회사인 Guangdong Shieldon Technology Co., Ltd.는 경쟁이 치열한 국제 시장에서 탁월한 포켓 나이프, 멀티 툴 등을 제공합니다. 우리는 기능적이고 신뢰할 수 있는 포켓 나이프와 야외 및 일상 사용을 위한 다목적 도구를 설계, 제조 및 글로벌 시장에 공급하는 데 중점을 둡니다. 최첨단 생산 장비와 ISO9001:2015 및 ISO9001:2015 인증과 함께 우리의 광범위한 제조 기술은 고객에게 모든 제품의 품질을 보장합니다.
OEM 나이프 프로젝트의 모든 단계에서 도움을 드릴 준비가 되어 있습니다. 귀하의 문의 사항과 예산을 보내주시면 이내 연락드리겠습니다. 24 시간.