How to custom a feather stick You can make a bonfire without the need for an ignition agent!

The presentation camper for Season 12 of “Ogiyahagi no Hapikan (produced by Me-Tele)” is Usiro City Yasuyoshi Asuwa, a camp master in the entertainment world. Feather stick, one of the techniques that appeared in the program, is a basic bushcraft technique that uses a outdoor knife to scrape wood and use it as an ignition agent. I will explain how to cusotm a feather stick that can start a bonfire without the need for an ignition agent!

 

What is a feather stick? The surface of the tree is fluffed and it becomes easy to catch fire. No need for an ignition agent.

“Hapican of Ogiyahagi” from Season 12

Feather stick is a technique to scrape the surface of a tree and make it fluffy like a bird’s feather (feather) to make it easier to catch fire. If you have a knife, wood, and a fire, you will be able to make a bonfire without using an ignition agent.

 

Even if the wood is a little damp, it will be scraped to give it a dry surface, and it will be easier to come into contact with oxygen, so it will be easier for the flame to rise than if the wood is burned as it is. If you pick up a fallen tree and use it, it will not always be dry, so it is often used in bushcraft.

 

Of course, it’s a technique that can be used when you normally bonfire in a camp! There are many campers who enjoy playing with fire rather than being driven by necessity.

 

[Necessary items for making feather sticks] Introducing 3 recommended items: knife, firewood, and leather gloves.

1) Knife for cutting wood

It is necessary to custom a feather stick, but first of all, a knife for cutting wood. It can also be scraped with a folding knife or cutter. It can be said that the one with a smaller blade is easier to handle even if you are not used to it, so it is easier to sharpen.

 

In actual camps, feather sticks are often made from the flow from batoning. Thin-edged knives and folding knives are not suitable for batoning, so considering the time and effort of switching to multiple knives, the knife used for batoning will be used as it is.

Mora knife Companion Heavy Duty MG

Blade material: Carbon steel Handle material: Rubber

Blade length: Approximately 10.4 cm Overall length: Approximately 22.4 cm Blade thickness: Approximately 3.2 mm Weight: Approximately 101 g (weight of knife only)

Accessories: Plastic sheath Country of origin: Sweden

* It is prohibited by law to carry this product without a justifiable reason.

* Those under the age of 18 are kindly requested not to purchase this product.

2) Firewood as a material Coniferous trees are recommended

Firewood used as a material for feather sticks. It is easier to cut if it has a diameter of about 2 to 3 cm and has corners like a square lumber at the beginning. If you only have thick firewood, use batoning to divide it into small pieces.

 

As with batoning, firewood is easy to cut with straight coniferous trees.

 

3) Leather gloves

Another good thing to have is leather gloves. Not only is it less likely to get injured when your hand slips, but even if you are not slipping, the hangnail is easy to get stuck in your fingers when you hold the firewood. If you stab it during camping, it will hurt soberly, and it will be difficult to remove it without tweezers.

It doesn’t get hot, so it doesn’t have to be made of leather as long as it protects your hands and is not slippery. Batoning, making feather sticks, igniting and bonfire. Considering that, if it has a certain degree of heat resistance, it is not necessary to replace it.

Kinco Gloves EDC Camp 50 COWHIDE DRIVERS Genuine Leather Gloves S / M / L

[Product specifications] The design may change depending on the distribution time. (With or without logo, font, uppercase letters, lowercase letters, etc.) Since it is an overseas standard product, there may be some fraying, scratches, small holes, etc., but if there is no problem in use, it will not be returned, so please be forewarned. Thank you. (Not eligible for returns and exchanges) Frayed logo part / rough sewn or frayed / adhesive / pen marks / scratches / holes of several millimeters / thickness and color of fabric, individual differences between left and right / smell of leather products (returned goods) (Replacement target) Holes and tears of 1 cm or more that fingers cannot enter due to poor sewing, Work gloves using cowhide (cowhide), Can be used for camping, gardening, gardening, custom, motorcycles, work, etc.

 

Inexpensive gloves are fine as they will always get dirty when used for work. Gloves with higher heat resistance will be thicker, but it will be harder to grip the knife. Leather work gloves like the link above are well-balanced and recommended.

 

[Let’s custom a feather stick] Points to distinguish between easy-to-shave order and difficult-to-shave reverse

First, hold the knife in your dominant hand and place the knife diagonally on the corner of the wood. The tip of the wood is hard to move when it hits the ground. The picture is taken with a camera, so I put wood on my foot, but hold it firmly with the opposite hand to the dominant hand so that it does not move.

 

Be careful not to put your hands or feet in the direction of travel of the blade. Not only myself, but also the bodies of others.

 

Move the knife from the front to the back and scrape the wood at a certain angle so that the corners of the wood are scraped thinly. At this time, do not scrape off completely, but stop the blade before it cuts off.

Repeatedly scrape with the image of gradually shifting the point to stop the blade toward you.

 

After shaving to some extent, change the angle of the wood and shave another corner.

 

The wood is scraped and the center becomes thinner little by little. Let’s stop before it breaks. If it breaks, it will break, so please do not throw away the pieces of wood. It can also be used for ignition!

 

Even if the wood has a straight grain, there are easy-to-cut order and hard-to-cut reverse grain. The photo above is a feather stick cut with a reverse eye. The feathers cannot be lengthened because the scraped feathers will come off.

 

It doesn’t mean that you can’t make it even if you turn it upside down, and it will catch fire. It’s just hard to scrape. If the shavings fall off when you shave, try shaving the wood in the opposite direction.

 

If you carefully observe the grain of wood from various angles, you can distinguish between normal and reverse grain, but it is difficult, so it is faster to cut it. The one that is easy to scrape is the first one, and the one that peels off immediately is the opposite.

 

The shavings that have fallen off from the wood can also be used for ignition, so collect them. It is easy to collect by scraping it on paper.

 

[Shieldon factory] Demonstrate making feather sticks in the program!

“Hapican of Ogiyahagi” from Season 12

This is a scene from Hapican Season 12 of Ogiyahagi. Under the guidance of Dr. Yasuyoshi Asuwa, we all custom feather sticks.

 

Image: Photographer Tatsufumi Yoshida

 

Yahagi is pretty good! A feather stick with long hair that seems to burn well. If you don’t have experience, you can’t do this easily. DJ Matsunaga also has a feather stick that can be used for ignition.

“Hapican of Ogiyahagi” from Season 12

Asuwa-sensei makes feather sticks that look like pills. On the right side of the photo, you can see an object like a skyfish with a different concept only for Mr. Ogi.

 

It usually doesn’t work from the beginning, so you don’t have to be depressed if you make a mistake. The scraped wood pieces will not be wasted, so let’s make them several times and learn the tricks!

 

[Try to light the fire with a feather stick] Let’s transfer the fire to the feather stick while creating a fire and sending oxygen.

It’s finally ignited, but this doesn’t have to be particularly difficult. First, place the feather stick.

Place a small piece of wood on top of the feather stick so that it covers the feather stick. If you have made several feather sticks, you can combine them.

Light the wings of the feather stick. A lighter or match can be easily lit. When the flame is rising as shown in the picture, there is no need to blow air.

 

“Hapican of Ogiyahagi” from Season 12

If you can wear it directly with only the fire starter, it is difficult to wear it without wind and sparks near the feather stick, and when you rub the fire starter, the feather tends to blow off. DJ Matsunaga is also struggling.

“Hapican of Ogiyahagi” from Season 12

If there is a crater such as charcross or loosened twine, the difficulty will be reduced. Let’s make a fire once and then transfer the fire to the feather while sending oxygen.

 

The rest is the same flow as a bonfire. Burn thin wood and gradually burn thick wood to increase the fire.

It is convenient to make several of them so that they can be easily recovered when the bonfire’s fire is weakened. It is dangerous to add gel ignition agent to the fire source, but feather sticks are just wood, so you can rest assured.

 

It’s an unnecessary technique if you have an ignition agent, but if you forget it, you can quickly scrape the wood and start a smart fire. As a practical technique, of course, please enjoy it as one of the fire plays!

 

Click to have more Shieldon EDC knives and tools fun.

Shieldon、Facebook、Instagram、YouTube、Twitter、Tumblr、Pinterest

Table of Contents

Custom Your Knife With an Experienced Knife Maker.

Connecting With Us

We are ready to help at any stage of your OEM knife project. Send us your enquiry and your budget and we will get back to you within 24 hours.