All you need for an outdoor EDC knife is strength and ease of sharpening! Beginners should choose based on these two!

Thanks! It is a self-proclaimed “discarder” Shieldon pocket Knives channel! Outdoor activities such as camping, bushcraft, and survival are accompanied by knives. There are few situations where you don’t need a knife to break or cook wood. But it’s hard to tell which of the many knives in the world is suitable for the outdoors. So this time, I would like to teach you the tips for choosing a knife outdoors. In conclusion, “strength” and “ease of sharpening” are important.

 

Strength

EDC knives are completely different in nature from home knives. The biggest difference is strength. You can see it by chopping wood with a kitchen knife. It can be broken in one shot. And the strength of the knife is greatly influenced by the following points.

 

Folding or sheath

The knife in the world

  • Folding knife

A blade can be folded and stored in a handle, also called a folding knife.

  • Sheath knife

It does not have a folding mechanism and is stored in a sheath.

 

It can be roughly divided into these two. And in the outdoors, sheath knives are the basis. The reason is simple, because folding knives are weak. Folding means that there is a point (pivot) that connects the blade and the handle at only one point. In other words, all the impact on the blade is concentrated on the pivot, so it is much less strong than a sheath knife without a folding mechanism.

 

Blade thickness

Of course, the thicker the blade of the knife, the stronger it will be, but there are limits to that.

For example, let’s say you have the same shape with blade thicknesses of 3mm and 10mm. As you can imagine, I couldn’t use a 10mm knife. If the blade thickness is 10 mm, the angle of the blade will be extremely blunt. It’s certainly hard to spill, but it feels like crushing rather than cutting. * To be precise, the blunt angle is 90 degrees or more, but this expression is used for the sake of clarity.

 

Full tang

There are various types of sheath knives. Among them, the sturdiest one is called “Full tongue”.

The comparison target is called “narrow tang”, and the steel material of the handle part is thin. It goes without saying which one is stronger. In addition, there is a “half tongue” where the steel material passes only to the middle of the handle and “concealed tongue” where the steel material of the handle part is thinned, but in either case the strength is not as strong as the full tongue.

 

Ease of sharpening

Obviously, it doesn’t make sense if you don’t cut the knife. An inseparable knife is just a blunt device. For that reason, “ease of sharpening” is also a very important point in order to keep it in a state where it can be cut at all times.

 

Carbon steel rather than stainless steel

There are countless steel materials for knives,

  • Rusting carbon steel
  • Stainless steel that does not rust

It can be divided into Zakuri and these two. And basically carbon steel is easier to sharpen. Even if you sharpen it in the same way, carbon steel is easier to attach a sharp blade than stainless steel. Of course, there are some stainless steels that are easy to sharpen, but the price goes up. For sharpening practice, we recommend a carbon steel knife at first.

 

Scanji grind

The cross-sectional shape of the blade is called “grind”. Depending on the type of grind, the ease of sharpening will change dramatically.

This is the main type of grind, but in terms of ease of sharpening, we recommend “Scandinavian grind”. The reason is simple. This is because the area in contact with the grindstone is large when sharpening. Convex is super difficult. The chisel grind (single-edged) also looks easy to sharpen in this figure, but there are few EDC knives with chisel grind. Chisel is easy to attach a sharp blade, but if you use it for chopping wood, it will instantly chip (spill). The blade knife is basically a chisel.

 

Recommended outdoor EDC knife

Based on the above points, I recommend the following knives.

 

Mora Knife Companion Heavy Duty

I’ve always said this, but if you’re a beginner, it’s safe to use a Mora knife. Of course, there are various types of Mora knives, but there is no doubt that you should prepare from the carbon steel model of “Companion Heavy Duty” first.

  • Cheap
  • Carbon steel
  • Scanji grind

Unfortunately, it’s not full tongue, but I’m still using the same model I bought three years ago. Unless you use it absurdly, it probably won’t break in an instant. And cheaper than anything else! Even a Scanji grind that is easy to sharpen will fail many times at first. If the first knife costs tens of hundreds of dollars, it’s difficult to use it as a practice table. In that respect, you can wholesale a Mora knife for around $20, so feel free to use it.

 

Helle knife Eggen

A Norwegian manufacturer called Helle knife has a knife called Eggen. Next to the Mora knife, this may be good. It is easy to sharpen with a Scanji grind, and although it is stainless steel, it has excellent sharpness. The handle is made of wood and the sheath is made of genuine leather. It’s not as expensive as a Mora knife, but it’s relatively cheap for a full-fledged bushcraft knife. By the way, Eggen is the edge of the blade. It’s a name that can’t be given unless you’re confident in its sharpness.

 

Summary

What is required for an EDC knife is “strength” and “ease of sharpening”. If you are thinking of starting the outdoors, please choose a knife that emphasizes these two things first. Knife is your EDC life companion. It’s better to have an excellent companion.

 

Click to have more Shieldon EDC knives and tools fun.

Shieldon、Facebook、Instagram、YouTube、Twitter、Tumblr、Pinterest

Table of Contents

Custom Your Knife With an Experienced Knife Maker.

Connecting With Us

We are ready to help at any stage of your OEM knife project. Send us your enquiry and your budget and we will get back to you within 24 hours.